Purchasing land for construction: Some tips

INSUBCONTINENT EXCLUSIVE:
Construction of a building following all the parameters is one of the toughest and most time-consuming jobs
But before that, selection of land is an even more challenging task, which has direct impact on your future planning and construction.We
engineers screen some of our basic engineering approaches and make the decision accordingly before giving constructive suggestions to our
clients.
What is the new COVID-19 variant BA.2, and will it cause another wave of infections in the US?
Locals donate 35 ropani land for hospital in Okhaldhunga
If you purchase a plot of land for Rs 25 lakh per anna, for instance, but have to
invest an extra Rs 60 lakhs during construction because of a terrace and other complications, then the overall investment will go up in the
long term
So some tips can be helpful to tackle any future ambiguity. The first consideration is the area and orientation of the land
It's imperative to understand that we can't buy land that is less than 2.5 annas anywhere or 6 dhurs in the Tarai
We always recommend our clients to consider buying more area to allow for better planning
So we always ask our clients to consider buying at least 4 annas of land for best construction.The shape of the land also plays a vital role
in construction
A square or rectangular piece of land is the best for construction, but if the land is triangular, irregular or has a small width, then you
need to rethink before considering it.Then comes road connectivity, as land with good road connectivity and facilities is a must
The basic rules say that the minimum width of a road needs to be 6 metres, and for a 6-metre road, you need to have a setback (minimum
distance which a building or other structure must be set back from a road or river) of at least 1.5 metres
If it is a dead-end road, the road must be four metres wide.For land which does not have a road width that is listed above, you and your
neighbour must contribute to make it of standard width
For instance, if the road is just 4.5 metres, then you and your neighbour will need to leave 1.5 metres for the road, while an extra 1.5
metres must be left individually during the construction.Land on a slope is another important parameter that needs to be taken care of
As much as possible, sloppy land must be avoided.Your investment will keep increasing if such land has a slope that is more than 15 degrees
In such a case, you shouldn't consider such land at all.We always recommend that you buy land that is at least 100 metres away from a sloppy
land, and the same applies for land that is below a slope.Land that is being filled with soil also needs to be taken care of
Such land needs to be given time for soil to settle, and one can use load impact practice, in which you pile loads such as bricks or similar
materials for a certain period of time before construction.We recommend at least six months of such practice.The next important thing to
consider is if the land is near a river
A river might seem small, but during the peak rainy season, it can prove catastrophic
So it's better to buy land 100 metres away from the river bank, and as per the rules, if the river is small, you must have a setback of at
least 10-30 metres
Big rivers could flood areas of up to 60 metres.High tension power lines are taken lightly by many people, and they land in trouble later on
If there is a high tension line passing near the land you intend to buy, it's good to stay 100 metres away from it
Government rules require one to have a setback of 1.5 metres from the centre of an 11 kV high tension line, 3 metres for an 11-22 kV line,
and at least 15 metres for a high tension line of 33 kV or above.If your land is surrounded by a road on three sides or four sides, a
setback of 1.5 metres is necessary as land with many road connections can drag you into a big problem afterward.These are some of the
technical aspects that we consider before making the valuation of the land and giving suggestions to our clients
But there are more important parameters, such as knowing the history of the land, which is equally important to ensure that it is not guthi
land or similar land belonging to some trust
To get more indepth information, connecting with the neighbours is the best alternative.Talking to your neighbours is important to know more
about the land and also to get connected with them, as you must live with them eventually.When you are done with these things, now it's time
to see if the area of the land in the field conforms to that of the document
Always tally the blueprint, land ownership certificate (lal purja) and field site area
Confirming all the details can help you to negotiate with the land owner afterward.Verifying the condition of the land and the people
associated with it or any ambiguity that might arise in the future will relieve you of many problems later at the Land Revenue Department
(Malpot Karyalaya).We engineers always recommend our clients to make a checklist of all the parameters that have been listed above and make
a tick so as to make a decision accordingly
These tips can save you from any future problem.For anyone who wants to invest in land, you can buy it cheap if it has a rough road but no
facilities, and the nearest road connectivity with good facilities is 500 metres to 1km away
Such land will have access to all facilities within a short period of time, and it will give you good returns on your investment.This is one
of the best tricks to find good land on an economic budget.We always advise our clients to consider at least five different plots of land
before arriving at a decision and make a wise decision by considering the flexibility, econometry, accessibility, viability and
sustainability of the land.Bhattarai is a senior engineer consultantA version of this article appears in the print on April 11, 2022, of The
Himalayan Times.
This article first appeared/also appeared in https://thehimalayantimes.com